About the Paranormal Puck 2
Like the Original Paranormal Puck, the Paranormal Puck 2 is designed to connected to a control device. In the Paranormal Puck 2 there are 6 additional standalone options. The standalone options enable the device to be used with a controlling app/software or autonomously.
There are 6 different autonomous modes available on the Paranormal Puck 2. These are modes available when not connected to a control device such as a smart phone, tablet or PC.
- Temperature / Humidity Mode
- The puck will play a rising or falling tone to indicate a change in temperature or humidity.
- Ion Mode
- This mode will set the base lights and change the colors. Brighter and more intense light reflect stronger levels of static electricity or ionization.
- Light Mode
- If the ambient light level in the location changes the Puck will play an alarm signal to indicate the light level change.
- PSI Mode
- In this mode the Puck will sound the alarm tone if the barometric pressure changes.
- Motion / Magnetism Mode
- This mode will run the alarm tones if the Puck senses vibration or a change in the magnetic field.
- All Mode
- As it sounds the puck will cycle through all modes continually.
Suggested Usage of the Puck 2
As a data tool the Puck can be monitored remotely. In most conditions this ranges from several feet away up to 15 meters. In ideal conditions this range may extend to 45 meters depending on the environment.
Since the Puck’s whole mission is data the user can see a record of what is happening around the Puck without having to try and read a screen in the dark or write down what the readings are. This is because all readings are captured in the data logs. Even when the Puck is in standalone mode it will still monitor the sensor being used and the Minimum and Maximum values can be retrieved from the puck at a later time.
The ITC mode on the Puck is our favorite feature allowing voice responses based on the energy levels the puck is reading. The user can ask questions or type them in and have them saved in the log if so desired.
Note there are no random functions; when the Puck speaks it is doing so because something has changed in the environment causing it to react.
There is a pervading idea at the heart of all the devices we have built for ITC. Simply if we believe that something can change the energy around the device it can use that energy to pick different words. If you were going up to a wall where there are 100’s of buttons. Each time you press a button it says the same thing. However every button says a different word. As you press the buttons you learn the words and soon you have a simple level of communications. Will the Puck say things that do not make sense? Yes! it is reading energy and our environment is full of EMF, static electricity and ionization.
When using the Puck for ITC experiments keep and open mind and always apply common sense.
Is the response quick? You always want to consider responses that occur in a minute or less.
Is the response appropriate? If you ask how old are you and the response is soup it is best to ignore the response.
Included Weatherproof Case
- Water resistant
- Impact resistant
- Hard shell durable plastic case
- Custom cut foam ensures a safe and snug fit for your device
- Engraved foam
- Portable hand sized (6″ x 4″ x 2″)
- Retractable USB Charging Cable
Android / Apple App / Software
Information on downloading the app comes with the Paranormal Puck. The app software cannot be used without the Paranormal Puck 2.
Want to learn more?
Full information on the modes and screens available on the Paranormal Puck 2 web guide.
About Original Paranormal Puck 1:
When we first introduced the Paranormal Puck almost 10 Years ago it shook things up a bit. Designed to be run from a PC, the original Paranormal Puck monitored temperature, EMF, and ionization. An entry in the log file was created for each sample from the sensors. In addition to data it also spoke as an ITC device.
Below is the original Paranormal Puck and sample output:
Below is a shadow image captured in real time from the original Paranormal Puck 1:
Below is an image of the EMF display as video data from the original paranormal puck 1:
The Paranormal Puck 2, is be a leap forward monitoring EMF, temperature, humidity, light levels, barometric pressure, movement, ionization / static levels and produce the legendary ITC sessions the original Paranormal Puck was known for. Instead of needing a PC the Paranormal Puck 2 will work with smart phones and tablets (iOS and Android).
The Paranormal Puck 2 is the most advanced gear we have ever built, the wireless connection will allow for remote IT sessions and the app will allow all data to be seen, visualized and shared directly from your smart phone or tablet compatible with iOS and Android.